The Crows Nest (2005-2019 Tacoma Topper Rack)

The Crows Nest (2005-2019 Tacoma Topper Rack)

from 499.00

Topper Rack for the 2005-2019 Tacoma’s

Current Estimated Lead Time: 2-3 weeks

Powder coat may add a week to the lead time

Powder Coat:
Crossbar Color:
Track Contour:
Short Bed/Long Bed:
Quantity:
Add To Cart
Made In America-01.png

Our racks are made entirely of USA sourced materials and assembled in the Rockies.

 

PRODUCT INFORMATION:

Designed to fit 2005-2019 Tacomas with ARE, Snug-top or Lear toppers. (Other toppers may work)

You must have a track system installed on your topper with 8 track nuts (M6 or M8).

Crossbar Dimensions: 1”Tx2”Wx48”L || Short Bed Rack Dimensions: 53”L x 48-1/2”W x 2”T* II Long Bed Rack Dimensions: 65”L x 48-1/2”W x 2”T*

Load Rating: Reference the weight capacity of your topper, do not load past 300lbs dynamic

1/4” 6061 Aircraft Grade Aluminum || 1/4” 5052 Adjustable Aluminum Brackets

5 Extruded Aluminum Crossbars || Stainless Hardware || Rust Free

No Drilling or Silicone Required

* From the highest point of the roof.

MOUNTING — The roof rack mounts into the installed roof tracks on your topper with four 1/4” thick adjustable aluminum brackets. These brackets allow you to adjust your topper rack for the perfect balance of keeping your weight as low as possible while still making it easy to mount accessories. Included will be M6 and M8 hardware to accommodate for the many aftermarket roof tracks.

CROSSBARS — The rack itself features five aluminum extrusion crossbars that can be adjusted forwards and back. When you combine the adjustability of the bars with the versatility of the t-slot channel built into each cross bar, it makes for an endless number of ways to mount your gear. We also offer

HAND HOLDS — Built into the side plate of each rack are hand holds that make getting to the gear on your roof a breeze. 

TIE DOWNS — More important than just getting to you gear is securing it. The built in anchor points can be used to quickly secure things to the roof without hassle of hard mounting. 

You must have a track system installed and 8 track nuts to mount this rack.

DETAILS

The roof rack DOES NOT ship assembled in order to reduce the cost of shipping. 

Unless powder coating is selected, all racks come UNPAINTED and are bare aluminum. Aluminum will not rust in wet conditions, but we do recommend painting as the bare aluminum does get micro scratches and finger prints on the surface during the manufacturing process.

All products built and designed by Sherpa Equipment Company are intended for off-road use and should be assembled, installed, and used according to Sherpa Equipment Company recommendations. Sherpa Equipment Company products should be used safely with good judgment towards others and surroundings.

By installing Sherpa Equipment Company products on your vehicle you assume all liability. Sherpa Equipment Company will not be held liable for damages or loss associated with the installation or use of its products.