The Quandary (GX470)
The Quandary (GX470)
Made for the 2002-2009 Lexus GX470
Current Estimated Lead Time: 2-3 Weeks
Powder coat may add a week or more to the lead time
*All rack systems ordered with a lightbar will receive our new brackets and hardware.
Our racks are made entirely of USA sourced materials and manufactured in the Rockies.
CUSTOMERS ALSO LIKED:
Designed to fit 2002-2009 Lexus GX470
Rack Dimensions: 86.5”L x 46.5”W x 2”T* || Crossbar Dimensions: 1”Tx2”Wx46”L
Load Rating: 400lbs Dynamic || 700lbs Static
1/4” 6061 Aircraft Grade Aluminum || 1/4” 5052 Aluminum Brackets
9 Extruded Aluminum Crossbars || Stainless Hardware || Rust Free
No Drilling or Silicone Required
*From the highest point of the roof.
MOUNTING — The roof rack mounts into the OEM roof holes with six 1/4” thick aluminum brackets. Rubber is used to form a seal between the mounting brackets and the roof gutter**. Our rack sits 2 inches off of the roof of the vehicle. This height is the perfect balance of keeping your weight as low as possible while still making it easy to mount things to the rack.
CROSSBARS — The rack itself features 9 aluminum extrusion crossbars that can be adjusted forwards and back. When you combine the adjustability of the bars with the versatility of the t-slot channel built into each cross bar, it makes for an endless number of ways to mount your gear.
HAND HOLDS — Built into the side plate of each rack are hand holds that make getting to the gear on your roof a breeze.
TIE DOWNS — More important than just getting to you gear is securing it. The built in anchor points can be used to quickly secure things to the roof without hassle of hard mounting.
FAIRING — The front fairing includes options for mounting a single row light bar or you can go with the full-size fairing if you wanna keep it simple. The fairing can be adjusted to varying heights, ensuring proper fitment on each vehicle. Fairings include rubber stripping to prevent vehicle damage.
**In extreme weather conditions, silicone sealant is advised.
The roof rack DOES NOT ship assembled in order to reduce the cost of shipping.
Unless powder coating is selected, all racks come UNPAINTED and are bare aluminum. Aluminum will not rust in wet conditions, but we do recommend painting as the bare aluminum does get micro scratches and finger prints on the surface during the manufacturing process.
All products built and designed by Sherpa Equipment Company are intended for off-road use and should be assembled, installed, and used according to Sherpa Equipment Company recommendations. Sherpa Equipment Company products should be used safely with good judgment towards others and surroundings.
By installing Sherpa Equipment Company products on your vehicle you assume all liability. Sherpa Equipment Company will not be held liable for damages or loss associated with the installation or use of its products.